General Accessories

Aluminum Cable Tray

Our aluminum cable tray products support and manage all cabling requirements.

Cable Runway Wall to Rack Kit

Wall to Rack Kit helps with providing support for cable between the rack and the wall.

E-Series Vertical Cable Managers

This trough style cable manager is perfect for use for any 2 and 4 post rack. Provides convenient cable run between racks. The open ports allow cable to flow front to back. The latches are spaced every 12 inches.

Two-Post Rack Roller Skates

Allows rack to be easily moved during assembly stages. Supports up to 500 lbs.

DMARC COLO Enclosure

The DMARC enclosure is perfect for colocation environments where individualized network drops are essential for security.

Wall Mount Double CAB

The Swing Cube is a cost effective EIA solution for mounting network, communications and security equipment in telecommunications rooms where floor space is limited. The front door can swing right or left. The Body can also be swung from the rear for easy access to network equipment Rated for 200lbs. Available in any Color. Standard colors are Black, White, & Gray.

Wall Mount Enclosure

The Swing Cube is a cost effective EIA solution for mounting network, communi-cations and security equipment in telecommunications rooms where floor space is limited. The front door can swing right or left. The Body can also be swung from the rear for easy access to network equipment Rated for 200lbs. Available in any Color. Standard colors are Black, White, & Gray.

Wall Mount Swing Rack

The Swing Gate is a cost effective EIA solution for mounting network, communications and security equipment in telecommunications rooms where floor space is limited.

Fixed Wall Mount Rack

The Fixed Wall Rack is a sturdy solution for mounting equipment to the wall Where floor space is limited.

Slim Wall Enclosure

The Slim Wall Enclosure is a sturdy solution for mounting equipment to the wall Where floor space is limited. Perfect for classrooms and retail stores. Equipment can mount vertically or horizontally.

Horizontal Cable Managers

Use our Horizontal Cable Manager together with RXL’s open architecture (Two-Post or Adjustable Four-Post Rack) products to organize and store cables. The Horizontal Cable Manager includes plastic cable guides to organize cable pathways as they enter and exit the manager to make individual equipment connections.

Vertical Trough Style Cable Managers

This trough style cable manager is perfect for use for any 2 and 4 post rack. Provides convenient cable run between racks. The open ports allow cable to flow front to back. The latches are spaced every 12 inches.

Terminal Ground Blocks

Our Terminal Ground Blocks meet BICSI and ANSI mounting recommendations. Use them to attach ground wires to racks

Filler Panels

Use to fill gaps between installed equipment to prevent bypass airflow. Choice of powder coated finish.

Rack Mounting Screws

12-24, Tapped Screw, Black Zinc, 50 pieces package.

Rack Base Dust Covers

The Rack Base Duct Cover prevents dust and dirt from collecting at the base of the rack. The Rack Base Dust Cover is designed to fit over the top of the base angles. Choice of powder coated finish.

Mac Mini Shelf

The Mac Mini Shelf can be used in any standard 19” EIA spaced Rack or Cabinet. Made of 16Ga Steel, Holds Mac Mini vertically. Height of the Shelf Populated is 5 rack units. Holds 8 Mac Minis

Brush Shelves

The Brush Shelf allows you to drop equipment inside the shelf. Brushes cover the front and rear of the shelf.

Four-Post Rack Shelves

Shelves are offered in both solid and vented versions.

Four-Post Adjustable Server Rack

The 4-Post Adjustable Server Rack supports IT equipment in Data Centers and Telecommuncation rooms. This rack can collaborate with both 2 and 4 ost racks to expand existing sytems.

Adjustable Open Four-Post Racks

The Adjustable Depth Open Four-Post Rack supports IT equipment in Data Centers and Telecommuncation rooms.

Two-Post Rack Shelves

Designed to hold equipment up to 17.75” inches Wide with a loading rating up to 100lbs when using . Available in single-sided, double-sided, vented and solid versions. Choice of powder coated finish.

Two-Post Rack

Use our Standard Two-Post Rack to mount your equipment in Data Centers and Telecommunication rooms.

Threaded Rod

Used to support cable runway from the ceiling. Clear zinc finish.

Stringer End Caps

Protects the exposed ends of Cable Runway, Sold in pairs.

J-Bolt Kits

The J-Bolt kit can be used for various applications. Kit includes two J-bolts, two nuts and two washers. Sold in black zinc.

Cable Runway Foot Kit

The Foot Kit secures a single piece of cable runway section to the floor, wall or ceiling. Manufactured from 3/8” thick steel. The kit includes one Butt Splice Kit. Mounting hardware not included. Available in both powder coated and Zinc plated finishes.

Ceiling Support Brackets

The Ceiling Support Bracket is used to attach threaded rod to the ceiling. Finish is black or clear chem film over zinc plating. Please note: Hardware not included and must be ordered separately.

Slotted Support Bracket

Use our Grounding Kits to provide grounding between cable runway sections and/or racks. The standard kit includes straps and hardware.

Cable Runway Support Brackets

The Support Bracket secures threaded rod to Cable Runway. Finish is black or clear chem film over zinc plating. Please note: Hardware not included and must be ordered separately.

Cable Runway Threaded Ceiling Kits

The Ceiling Support Kit is used to attach threaded rod to the ceiling. Finish is black or clear chem film over zinc plating. Please note: Lag bolts not included.

Cable Runway Center Support Kits

The Center Support Kit attaches Cable Runway to the ceiling. Each kit includes one Center Support Bracket, one re-inforcement beam, two 5/8-11 hex nuts, one 5/8 split lock washer, one 12 inch long threaded rod cover and one J-bolt kit. Use part # 1226 for 2 inch high version. Choice of powder coated finish.

Cable Runway Patch Rack Kits

The Cable Runway Patch Rack is designed to attach to the Cable Runway stringer above a rack or cabinet for additional equipment mounting space. Choice of powder coated finish.

Cable Runway Offset Kits

Use our Cable Runway Offset Kit to add runway parallel or perpendicular to the existing one. The kit includes two steel supports, four steel brackets and mounting hardware. Choice of powder coated finish.

Cable Runway Moveable Cross Member

The Moveable Cross Member attaches to the inside of the stringers where a cross member doesn’t exist to allow for the installation of a radius drop. Manufactured from 1/4” thick Aluminum flat bar. Mounting hardware included. Choice of powder coated finish.

Cable Runway Steel Triangle Support Brackets

The Modular Steel Triangle Support Bracket is manufactured from steel and is designed to support Cable Runway along a wall application J Bolt kit included. Choice of powder coated finish.

Cable Runway Triangle Support Brackets

The Triangle Support Bracket supports and strengthens cable runway along a wall application. Aluminum is 1/4” thick x 2”W; J-Bolt kit included. Choice of powder coated finish.

Cable Runway Vertical Wall Bracket Kits

The Vertical Wall Brackets are used to secure Cable Runway with 1.5” x 3/8” (38mm x 9.5mm) stringers to the wall. Offered in both powder coated and zinc plated finishes. Sold in pairs.

Cable Runway Wall Angle Support Kits

The Wall Angle Support Kits are designed to support various Cable Runway widths and mounts directly to the wall. J Bolt kit included. Choice of powder coated finish.

Rack-To-Runway Mounting Plate Kits

The Rack-To-Runway Mounting Plate installs to the top of a Two-Post or Four-Post Rack. This product can be mounted either parallel or perpendicular. J Bolt kits included. Choice of powder coated finish.

Cable Runway Elevation Kits

The Cable Runway Elevation Kit supports cable runway above Racks or Cabinets. Can be mounted perpendicular or parallel. Kit includes brackets and assembly hardware. Rack kit requires Rack-to-Runway Mounting Plate (sold separately). Choice of powder coated finish.

Cable Runway Divider

The Cable Spool Runway Divider. Seperates cables to improve cable managment and control cable to cable distances. The Bracket attaches to the cross member and can move anywhere along it. Kit includes 10 Spools, Bracket, and Hardware.

Cable Runway Radius Drops

Radius Drops attach to the cross member or stringer to help maintain smooth drops of cable. Provides 3 inch (76mm) bend radius. Choice of powder coated finish.

Cable Runway L-Shoulder Bracket

The L-Shoulder Bracket allows power cables, conduit and fiber duct to run parallel to the cable runway stringer. The L-Shoulder Bracket comes with 1/4-20 hex screws and attaches to the stringer. Choice of powder coated finish.

Cable Runway End Termination Kits

The End Termination Kit is designed to close off the end of a cable runway section. The kit includes one cross member and two Junction Splice Kits. for 2” Stringer version, use part # 1227. Choice of powder coated finish.

Cable Retaining Posts

Cable Retaining Posts provide extra cable depth to existing cable runway installations. Attaches to cable runway side stringers, both 1.5” and 2”. The post is 3/8” x 1-1/2” (9.5mm x 38mm). Choice of powder coated finish.

Junction Splice Kits

Use Splice Kits to connect two sections of Cable Runway. The Heavy Duty versions requires drilling holes in the cable runway stringer. Finish is black chem film over zinc plating.

Butt Splice Kits

The Butt Splice Kit is used to connect two sections of Cable Runway. Finish is black chem film over zinc plating.

Grounding Butt Splice Kit

Introducing RXL’s Patented Grounding Butt Splice Kit made of 1075 Spring Steel. Reduce your labor costs while saving both time & money.

Cable Runway Cross Sections

Use the Cross Section when creating an “X” intersection. Eliminates the stringer at the intersection thus allowing for a smooth flat continued transition. Available in both the 1.5”H Telco Style Cable Runway and 2”H Telco Style Cable Runway. Choice of powder coated finish.

Cable Runway Tee Sections

Use the Tee Section when creating a “T” intersection. Eliminates stringer at the intersection, thus allowing for a smooth flat continued transition. Available in both the 1.5” & 2” Style Cable Runway. Choice of powder coated finish.

Cable Runway Corner Brackets

The Cable Runway Corner Bracket is used to create intersections between cable runway sections and can be used to form L, T or X type junctions. Manufactured from rectangular (3/8” x 1.5” x .065”) steel tubing (9.53mm x 38mm x 1.65mm). Kit contains mounting brackets and hardware for easy installation. Choice of powder coated finish.

2″ Telco Style Cable Runway

2” Telco Style Cable Runway provides a solution to cable pathway routes. Fully RoHS 2011/65/EU Compliant. Includes complete hardware, accessories and support options. Offered in both powder coated and zinc plated finishes.

Telco Style Cable Runway

Telco Style Cable Runway provides a solution to cable pathway routes. Fully RoHS 2011/65/EU Compliant. Hardware, accessories and support options are available for this product line. Offered in both powder coated and zinc plated finishes.

2″ Global Cable Runway

2” Global Cable Runway provides a solution to cable pathway routes. Fully RoHS 2011/65/EU Compliant. Includes complete hardware, accessories and support options. Offered in both powder coated and zinc plated finishes.

Global Cable Runway

Global Cable Runway provides a solution to cable pathway routes. Fully RoHS 2011/65/EU Compliant. Hardware, accessories and support options are available for this product line. Offered in both powder coated and zinc plated finishes.

Cable Runway Radius Bend

The Radius Bend creates a 90 Degree vertical bend for cable runs. Manufactured from rectangular (3/8” x 1.5” x .065”) steel tubing (9.53 mm x 38 mm x 1.65 mm) with three cross members welded on 23° increments. Choice of powder coated finish.

Cable Runway Reducer 18″-12″

The Cable Runway Reducer is the solution for changing runway widths quickly. Each Reducer is 18” long and has two Cross Members. One on the short end and one on the longer end. Each Cable Runway Reducer comes with two splice kits. We recommend using a Center Support Kit when using a reducer. Choice of powder coated finish.

Cable Runway E-Bends

When installed horizontally creates an easy 90° turn between the individual cable runway parts. Manufactured from rectangular steel tubing and has cross members welded on 23° increments to allow a nice 90° sweep to either side. Choice of powder coated finish.